By Joshua M. Johnson 
In today’s digital age, a reliable and fast internet connection is crucial for a seamless online experience. Eero, a popular mesh network system, enables you to cover your entire home with WiFi, eliminating dead zones and connection issues common with traditional routers. If you’re ready to enhance your home connectivity, this guide will walk you through the Eero mesh network setup process step-by-step.
Essential Preparation
Before diving into the setup, ensure you have all the necessary equipment and a few important items ready:
What’s in the Box
- Eero devices (as many as you plan to install)
- Ethernet cable
- Power cord(s) for your Eero devices
Requirements
- A mobile device with the Eero app downloaded (available on both iOS and Android).
- A current internet service that meets the minimum speed requirement of 1 Mbps.
- A modem or modem-router combination connected to your internet service if applicable.
Important Considerations
- Ideally, your modem and the primary Eero unit (known as the gateway) should be placed centrally in your home for optimal signal coverage.
- Check that the Eero device you’re setting up has a connection to your modem’s Ethernet port.
Step-by-Step Setup Process
Step 1: Download the Eero App
Begin by downloading the free Eero app from the Apple App Store or Google Play Store. Remember, setup cannot be completed via a web browser.
Step 2: Create an Account
Once the app is installed, open it and either log in using your Amazon account or create a new Eero account. For new accounts, you will receive a verification code via SMS or email—enter this to proceed.
Step 3: Setting Up Your Eero Gateway
- Unplug your existing modem and router to avoid conflicts during the setup.
- Connect the gateway Eero (the main device) to your modem using the provided Ethernet cable.
- Power up the Eero by plugging it into an outlet. Reconnect your modem afterward.
You’ll know the Eero is ready when its LED status light starts flashing white.
Step 4: Creating Your Eero Network
- Within the app, select the option to create your Eero network. The app will detect the gateway Eero you’ve just set up.
- If necessary, enter the serial number found on the bottom of your Eero device.
- Next, choose a name (SSID) and password for your network. If you’re replacing an old router, you may opt to use the same SSID and password for convenience.
Step 5: Adding Additional Eeros
Once your primary network is established, you can add more Eero devices (such as Beacons) to extend coverage:
- Place each additional Eero within 30 feet of the primary device initially for setup. After setup, you can experiment with placement to eliminate any dead zones in your home.
Placement Tips
When positioning your Eero devices, follow these guidelines for the best coverage:
- Place the gateway Eero as central as possible.
- Position add-on Eeros in areas where coverage is weaker, ideally halfway between your main and dead zones.
- Avoid placing Eeros near thick walls or electronic devices that may cause signal interference.
Finalizing Your Setup
After adding and positioning your Eero devices, the app will guide you through the remaining setup steps, confirming successful network establishment.
Consider running a speed test within the app to ensure you’re receiving optimal performance across your devices.
Troubleshooting and Support
Should you encounter any issues during setup, the Eero app and the company’s online support offer valuable resources and troubleshooting tips. It’s recommended to periodically check firmware updates to keep your system running smoothly.
Conclusion
With this comprehensive guide, you should be well on your way to enjoying a robust Eero mesh network throughout your home. Experience uninterrupted streaming, gaming, and browsing as you’ve never seen before. Happy surfing!